install help

Installation Guide for Rozet Handle:

1- First, pass the four-sided axis A in a way that its elliptical groove is facing downward through the lock hole, and adjust its distance on both sides of the door.

2- Then, place the plastic cartridge guide B on the four-sided axis and then place the numbered screw base C on the plastic cartridge guide.

3- Now, create the installation screw locations D on the door and remove the plastic piece.

4- Use the plastic guide B (plastic cartridge) carefully on both sides of the door for installation to prevent any deviation.

5- Ensure that the four sides of the door are consistent, and finally, install the handle and base screw E on the screw base and tighten the brain screws F under the handle and under the screw with the Allen wrench G.

6- If any error or deviation occurs in the installation of the D pages, use the pages and screws H.

Installation Guide for Rozet Switch:

1- First, place Cylinder A in its position and attach Plastic Cartridge B in a way that the central protrusion separates, placing it on the cylinder.

2- Then, place Reseat Base C on the plastic piece B.

3- Use Guide Piece B (Plastic Cartridge) carefully on both sides for installing the door to avoid any deviation.

4- Now, create the installation holes on the door using Installation Screws D, and remove the plastic piece.

5- Ensure the cylinder is uniform on both sides of the door. Finally, install Switch Screw E on the Reseat Base and tighten the Threaded Screw F under the Reseat with Allen Wrench G.

6- If there is any error or deviation in the installation of D pages, use Pages and Screws H.